Why do assembly factories require minimum order quantities and not willing to accept small order?

Many people have encountered the situation of being rejected for small quantities when asking about SMT, and most of the reasons given for the rejection are "small quantities are not cost-effective" and "High start-up losses". What are the so-called losses?

Before SMT processing, you need to do the same preliminary work as when you receive a large order, such as SMT machine programming, PCB positioning, start the first piece of confirmation of this type. In the case of a small amount, the so-called loss, more is the loss of time. Because in the same time, the production efficiency of SMT with large processing volume is higher, so as not to waste time on the preliminary work after a morning or a day of production. And in the machine in and out of the time, so we prefer to receive the kind of area is not very large, but the patch point is very concentrated, so that both high efficiency, but also greatly save a variety of labor costs, machine losses, etc.

To quote the boss of the factory, "the quantity is so small that it can be finished in one morning, and I have to spend another morning to help you locate (pre-work)" Therefore, in the case of a small quantity, the so-called loss is more of a loss of time. The high cost of time is naturally not cost effective. The main reason is that many small things do not make money, which is indeed the reason why many factories are not willing to do small orders. So a small amount of price is naturally high, so also hope that small amount of customers can understand.

Each manufacturer's management costs are different, some manufacturers will choose to meet their users, some manufacturers specialize in serving some large customer cooperation, because they are large, stable orders, relatively speaking, single product profits will not be too high, to grab some number of large customers do not have to worry about bulk orders.

So what about the small orders we have in hand? Seektronics is doing just the opposite, they have high-speed smt machines to meet the needs of small businesses with fast R&D and small studio products, starting from one piece. Welcome your inquiry to sales@seektronics.com

Comments

The biggest problem with the latest 56 semiconductor manufacturers suspend orders, price increased, and long lead time. How can you fix it?

Following the suspension of MCU orders by ELAN , Holtek Semiconductor issued a notice on 21st April suspending orders with immediate effect. The price of various semiconductors, especially MCUs, has risen as a result of factors such as the tightness of 8-inch wafer foundries. The demand for MCUs is so high that many major MCU manufacturers at home and abroad are operating at full capacity, but supply still exceeds demand. In its notice, Holtek Semiconductor stated that Suspension of orders for 2022 Subject: Orders with delivery dates in 2022 are suspended with immediate effect. Description: 1. The wafer fabs and packaging houses have advised that there will be another wave of price increases soon - price increases of 15%-30%. 2. The fabs are expected to provide 2022 production numbers by early May and will announce 2022 order acceptance rules when confirmed. 3. expected to resume accepting orders for 2022 by mid-May. 4. 2022 orders that have received deposits will be rescheduled

Understanding of DC-DC buck bootstrap circuit

In the peripheral circuit design of DC-DC BUCK chips, we usually add capacitors or a combination of capacitors + resistors between the BOOT and SW pins, this piece of circuit is called bootstrap circuit, the capacitors and resistors in the bootstrap circuit are called bootstrap capacitors and bootstrap resistors. What is a bootstrap capacitor? DCDC Buck chip has a pin called BOOT, and some are called BST. The following is an explanation of the BOOT pin of a DCDC chip. In the external circuit design, a capacitor, generally 0.1uF, is needed between the BOOT and SW pin, and is connected to the driver end of the high-end MOS tube of DCDC. How does a bootstrap capacitor work? The following is a block diagram of a DCDC BUCK chip, the top NMOS is called the high-side MOSFET and the bottom NMOS is called the low-side MOSFET. When the high side MOS tube is turned on, SW is VIN, SW charges and stores energy in the inductor, and the inductor current is rising; when the low side MOS

2022 global chip shortage continues: ST、NXP、ADI、XILINX、ONSEMI、DIODES... latest trends

Under the influence of the epidemic and various emergencies around the world, the global chip industry fell into a shortage of stock in 2021. Now it has been a year, and the shortage of chips seems to have not eased. Below, we have collated the latest market developments of the original chip manufacturers such as ST, Renesas, NXP, ADI, ON Semiconductor, Microchip, Qualcomm, etc., so that you can have a good idea of the market situation. ST: Large shortage of high-end products and automotive chips Most stockists have been selling off since the prices of ST products have fallen back, but this month has seen a small rebound. For example, STM8S003F3P6TR and STM32F103VCT6 , two pieces of material, have seen a small price increase. It is worth noting that the market price of ST's brake system chips has recently soared, and other automotive chips have also risen, and there is still a large shortage of high-end products and automotive chips, and delivery times are still long. In additi

Teach you 5 ways to identify and avoid counterfeit electronic components in a second

In the process of purchasing electronic components, the most worrying thing for buyers is not the price, but the quality of the product. There are a variety of IC chips on the market, of all kinds, and without paying attention to the distinction, it is sometimes difficult to see the difference between various materials, whether it is true or false, new or refurbished. The following is a compilation of some methods to identify genuine and fake chips, for your reference. Common chip counterfeiting methods Material A counterfeit material A Original manufacturer's tailor loose material: the original packaging has been disassembled or is no longer available, but product functionality and yield may be lower due to storage time or handling process, etc. Original manufacturer scrap or defective products: mainly products that have not passed factory inspection by the original manufacturer, such as scrap products after reliability testing, poor packaging quality, bad test products, etc. Orig

9 effective ways to improve your electronic components specification for approval

1. Let purchasers find manufacturers to provide specifications, safety information, environmental protection information, insurance information - E-document 2. Verify that the information is true and complete, such as the applicable period of the document, so as not to be fooled by the manufacturer. 3. Let the buyer find the manufacturer to provide samples, specifications, safety information, environmental information, insurance information - Paper files 4. Environmental test: send several samples to the environmental laboratory for ROSH halogen test. 5. Electrical specifications and high-temperature testing - e.g. electrolytic capacitors : A: measuring capacity and deviation withstand voltage, PIN foot tin is good B: go through the production line to see if the capacitors are deformed after the high temperature of the furnace and if the capacity and the deviation voltage are okay. 6. Body size check - e.g. electrolytic capacitors . Body height and diameter, PIN pin spacing, PIN pin d

Seektronics

Search This Blog