Difference Between chip, module and development board

1. From the shape.

1.1 Chip

Yes, this small black silicon chip is the "chip" itself (usually smaller than a thumb, integrated inside the hardware integrated circuits to achieve specific functions).

1.2 Module

The module developed from the above chip looks like this.

From the appearance, the module is much brighter than the chip (at least, you can see the copper foil, the pins), and that black ESP32 chip is inside him.

1.3 Development board

The development board developed by the above module looks like this.

Yes, the part marked ESP-WROOM-32 on the development board is the "module" above. The development board is much more luxurious than the "module" (finally, there are buttons, USB ports, and LEDs), do you want to write a program to light up the LEDs immediately?

2. Development Mode

Want to light up LED lights? Wait! Let's talk about how to burn the program into the chip, module, and development board.

First of all, it is difficult to directly burn the program to the black "chip", imagine, he does not even have the copper foil pins to connect the wires, how to connect the wires to the power supply, how to download the program? Yes, we can not directly to the chip for software development.

At present, there are two main modes of development for ESP32: module mode and development board mode

2.1 Module method.

Hardware needed: a module + USB to serial cable + Dupont cable + soldering tools

Physical connection.

2.2 Development board mode.

Hardware needed: development board + a USB cable

Physical connection.

See, isn't the development board mode more convenient for development? No need to solder yourself, you can connect the development board with USB cable to realize plug and play and start the development journey.

Comments

The biggest problem with the latest 56 semiconductor manufacturers suspend orders, price increased, and long lead time. How can you fix it?

Following the suspension of MCU orders by ELAN , Holtek Semiconductor issued a notice on 21st April suspending orders with immediate effect. The price of various semiconductors, especially MCUs, has risen as a result of factors such as the tightness of 8-inch wafer foundries. The demand for MCUs is so high that many major MCU manufacturers at home and abroad are operating at full capacity, but supply still exceeds demand. In its notice, Holtek Semiconductor stated that Suspension of orders for 2022 Subject: Orders with delivery dates in 2022 are suspended with immediate effect. Description: 1. The wafer fabs and packaging houses have advised that there will be another wave of price increases soon - price increases of 15%-30%. 2. The fabs are expected to provide 2022 production numbers by early May and will announce 2022 order acceptance rules when confirmed. 3. expected to resume accepting orders for 2022 by mid-May. 4. 2022 orders that have received deposits will be rescheduled

Understanding of DC-DC buck bootstrap circuit

In the peripheral circuit design of DC-DC BUCK chips, we usually add capacitors or a combination of capacitors + resistors between the BOOT and SW pins, this piece of circuit is called bootstrap circuit, the capacitors and resistors in the bootstrap circuit are called bootstrap capacitors and bootstrap resistors. What is a bootstrap capacitor? DCDC Buck chip has a pin called BOOT, and some are called BST. The following is an explanation of the BOOT pin of a DCDC chip. In the external circuit design, a capacitor, generally 0.1uF, is needed between the BOOT and SW pin, and is connected to the driver end of the high-end MOS tube of DCDC. How does a bootstrap capacitor work? The following is a block diagram of a DCDC BUCK chip, the top NMOS is called the high-side MOSFET and the bottom NMOS is called the low-side MOSFET. When the high side MOS tube is turned on, SW is VIN, SW charges and stores energy in the inductor, and the inductor current is rising; when the low side MOS

2022 global chip shortage continues: ST、NXP、ADI、XILINX、ONSEMI、DIODES... latest trends

Under the influence of the epidemic and various emergencies around the world, the global chip industry fell into a shortage of stock in 2021. Now it has been a year, and the shortage of chips seems to have not eased. Below, we have collated the latest market developments of the original chip manufacturers such as ST, Renesas, NXP, ADI, ON Semiconductor, Microchip, Qualcomm, etc., so that you can have a good idea of the market situation. ST: Large shortage of high-end products and automotive chips Most stockists have been selling off since the prices of ST products have fallen back, but this month has seen a small rebound. For example, STM8S003F3P6TR and STM32F103VCT6 , two pieces of material, have seen a small price increase. It is worth noting that the market price of ST's brake system chips has recently soared, and other automotive chips have also risen, and there is still a large shortage of high-end products and automotive chips, and delivery times are still long. In additi

Teach you 5 ways to identify and avoid counterfeit electronic components in a second

In the process of purchasing electronic components, the most worrying thing for buyers is not the price, but the quality of the product. There are a variety of IC chips on the market, of all kinds, and without paying attention to the distinction, it is sometimes difficult to see the difference between various materials, whether it is true or false, new or refurbished. The following is a compilation of some methods to identify genuine and fake chips, for your reference. Common chip counterfeiting methods Material A counterfeit material A Original manufacturer's tailor loose material: the original packaging has been disassembled or is no longer available, but product functionality and yield may be lower due to storage time or handling process, etc. Original manufacturer scrap or defective products: mainly products that have not passed factory inspection by the original manufacturer, such as scrap products after reliability testing, poor packaging quality, bad test products, etc. Orig

9 effective ways to improve your electronic components specification for approval

1. Let purchasers find manufacturers to provide specifications, safety information, environmental protection information, insurance information - E-document 2. Verify that the information is true and complete, such as the applicable period of the document, so as not to be fooled by the manufacturer. 3. Let the buyer find the manufacturer to provide samples, specifications, safety information, environmental information, insurance information - Paper files 4. Environmental test: send several samples to the environmental laboratory for ROSH halogen test. 5. Electrical specifications and high-temperature testing - e.g. electrolytic capacitors : A: measuring capacity and deviation withstand voltage, PIN foot tin is good B: go through the production line to see if the capacitors are deformed after the high temperature of the furnace and if the capacity and the deviation voltage are okay. 6. Body size check - e.g. electrolytic capacitors . Body height and diameter, PIN pin spacing, PIN pin d

Seektronics

Search This Blog